The Steps of The Ironing Method in The Ironing Center

A complete ironing center is that ironing center is attached to and stored in a closet. The ironing board extends vertically from the back wall of the cabinet. In one embodiment, the cabinet is integrated into a larger wall cabinet system. The cabinet extends from the wall cabinet and is locked in the open position. This complete ironing center system can be easily and quickly closed and stored in a cabinet when not in use. Next, I will introduce you to the ironing center.

Here is the content list:

• What are the components of the ironing center?

• What are the characteristics of the ironing center?

• What are the steps of the ironing method in the ironing center?

What are the components of the ironing center?

The ironing center has a cabinet with a first side, a second side, a top, a bottom, and a back; wherein the first side, the second side, the top, the bottom, and the back form a compartment with an inner side and an outer side. The ironing board of the ironing center has a top surface, a bottom surface, a top-end, and a bottom end. A board frame has two support legs, each support leg has a first end and a second end, two base supports, one vertex support, and two There are two roller tracks, each track has a stopper, and a roller frame with a first end and a second end. The ironing center also has a latching system, which includes a latch with a first end and a second end, and an impact plate. The latching system of the ironing center is generally installed on the top slide rail outside the top of the cabinet.

What are the characteristics of the ironing center?

The pull-out feature of the ironing center overcomes space and aesthetic issues by fitting into a wall or closet in a lateral configuration. This arrangement allows the ironing center to be completely contained behind a very narrow door. In an implementation case where a door panel is less than 18 inches wide and a door panel is less than 12 inches wide, once the ironing center cabinet is pulled out into the room, apply the stabilizing latch and then pull the top and bottom of the ironing board forward Until the latch pin is stuck on the impact plate, the ironing center can be locked to a fixed position. In addition, to release the pull-out ironing center, the user can pull the lock catch and move the extended end of the ironing board upward into the pull-out cabinet. Release the stabilizing lock and put the entire unit back into the storage position in the original wall cabinet, and the ironing center will seamlessly integrate with other adjacent cabinets.

What are the steps of the ironing method in the ironing center?

The ironing center mainly includes the following steps: contact the ironing center components; engage the stability latch; pull down the ironing board of the ironing center and lift the bottom end to extend the ironing board; engage the latch system of the ironing center; And iron on the upper surface of the ironing board.

It is the responsibility of each manufacturer to produce an ironing center that meets the standards, to ensure the safety of the electricity supply and the healthy development of the cable market. Easton Hotel Supplies Co., Ltd. conducts many tests on ironing centers for connection before they leave the factory, and the quality qualification rate is guaranteed. If you are in the ironing center business, you can consider our cost-effective products.